Power Flushing in Leyton E10
Need a Power Flush in Leyton E10?
A Powerflush is an efficient way of removing the corrosion that can create sludge and dirt that builds up in your system over time. This one off deep clean makes sure your radiators heat up properly and there are no more cold spots.
This helps to increase the life of the whole system, keeps heating bills down and reduces the risk of breakdowns.
Symptoms that say “you probably need a powerflush”…
- Boiler or pump noise or failure
- Poor or reduced hot water temperature
- Boiler overheats or shuts off when hot water is needed
- High Fuel bills
- Cold spots at the bottom of radiators or not working
- The system is slow to heat up
- Radiators need regular bleeding of accumulated air
- Evidence of sludge and rust in the system
Fixed Price Powerflushing from £350 Only
How will you benefit from powerflushing an existing system?
There are a multitude of benefits from Powerflushing a Central Heating System.
- Make old system work like new
- Increase life of the system
- Reduced fuel bills (up to 25%)
- Reduces the risk of breakdown
- Improved central heating system efficiency
- Improved Hot Water
- Quicker heat up times
- Restores heat output to radiators
- Stops hydrogen gas which then cause radiator corrosion
- Minimises boiler problems
- Minimises boiler warranty problems
- A warmer home
What can be done to prevent this reoccurring in the future?
In order to prevent this occurring in the future, we usually advise the installation of a Magnetic Filter/ Scale Reducer, which collects the residue at a central point and can be cleaned at the time of a service.
New Boiler Warning
Many leading boiler manufacturers will void your warranty unless the system is powerflushed prior to installing the new boiler. Boiler manufacturers insist that old heating systems be thoroughly flushed before installing a new boiler and if it is not performed the manufacturer warranty will usually be cancelled.
If you purchase a new boiler or new central heating radiators you should consider powerflushing because whilst your new boiler is in pristine condition it will soon be contaminated by sludge, rust and debris which are in your old heating system causing components failure or affecting performance of the system.
High efficiency modern boilers have very narrow passageways in the heat exchanger and are very sensitive to rust, sludge, scale and other debris which can cause blockage.
Only by powerflushing can you be sure that a system is clean to the standards demanded by modern boilers and heat exchangers.
Book a fixed price Power Flush in Leyton E10
It couldn't be easier - to get your Gas Central Heating Power flush by a local Gas Safe registered engineer, just Book a free quote by calling us FREE on 0800 118 2128 , request a call back, or alternatively, click here to book a Power Flush online and a member of our team will be in touch shortly to confirm your booking .
Protect you, your family or your tenants, by booking a Gas Safe Registered engineer to power flush your Gas Central Heating or boiler in Leyton E10 today! |
LET US CALL YOU! 
